How do I enable NVMe in BIOS?

Bilgisayarınızın performansını artırmak ve daha hızlı veri transferi sağlamak için NVMe (Non-Volatile Memory Express) sürücülerini etkinleştirmek önemlidir. BIOS ayarlarına erişim sağlayarak, doğru adımları izlemek ve NVMe desteğini aktif hale getirmek, sisteminizin verimliliğini büyük ölçüde artırabilir. Bu işlem, genellikle kullanıcıların ilk etapta karşılaştığı bir durumdur ve doğru yönlendirmelerle kolaylıkla gerçekleştirilebilir.

To enable NVMe in BIOS, follow these general steps:

Access the BIOS: Restart your computer and press the designated key during startup (e. g. , Delete, F2, or Esc) to enter the BIOS settings.

Navigate to Storage Settings: Locate the section related to storage or boot order. This may vary by manufacturer, but common terms include "Boot, " "Storage Configuration, " or "Advanced SATA Configuration".

Set Boot Priority: Ensure your NVMe SSD is listed as the first boot device in the boot priority order.

Save Changes and Restart: Save the BIOS settings by pressing F10 or a similar key, then select "Save & Exit" or "Exit & Save Changes". Your computer will restart, and the NVMe SSD should now be activated.

Check for BIOS updates and verify compatibility with your motherboard and NVMe SSD before proceeding.

1. Access the BIOS: Restart your computer and press the designated key during startup (e. g. , Delete, F2, or Esc) to enter the BIOS settings.
2. Navigate to Storage Settings: Locate the section related to storage or boot order. This may vary by manufacturer, but common terms include "Boot, " "Storage Configuration, " or "Advanced SATA Configuration".
3. Enable NVMe Support: Look for an option to enable NVMe or M. 2 support. The setting might be labeled differently depending on the BIOS interface. Set the SATA mode to AHCI (Advanced Host Controller Interface) if available.
4. Look for an option to enable NVMe or M. 2 support. The setting might be labeled differently depending on the BIOS interface.
5. Set the SATA mode to AHCI (Advanced Host Controller Interface) if available.
6. Set Boot Priority: Ensure your NVMe SSD is listed as the first boot device in the boot priority order.
7. Save Changes and Restart: Save the BIOS settings by pressing F10 or a similar key, then select "Save & Exit" or "Exit & Save Changes". Your computer will restart, and the NVMe SSD should now be activated.